Applies to: NW41V/N441H/N441K/N28WEB/N441B/N441D/N441L/N44PAN/N44PAJ/N34WDB/N34WDD/N44WEB/N44WED/N44WEC/NW41V/N44WBD/N48WHP/N48WHE
Motion detection recording means NVR will record automatically when it is triggered by movement.
The DVR needs an internal hard disk drive for recording. Without the hard drive, the system can show live viewing, but can’t record , playback either.
Go to record setup-Record plan
choose the channel, set the weekday, set the time schedule, and check the "motion".
Then click "Apply" to save the config.
2. Go to motion detection to enable it.
If you want to play back the recording, there is the method.
https://help.annke.com/hc/en-us/articles/360000254681-How-to-play-back-recordings-
Comments
0 comments
Article is closed for comments.