Applies to: DH81NK/DH41NK/DM21O/DM31O/DL81A/DH81S/DH81NG/DN81NB/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ER
1. create a user name and password on FTP. Make sure it can be used to log in FTP.
2. create a folder on FTP to save the recording.
3. Go to DVR system's Main menu----System---Netservice----FTP to fill out the user name, password, port number, folder path. If it says test success, FTP set-up is working fine.
4. Go to the Main menu---alarm----motion detection to set up FTP uploading video.
5. Finally, if there is movement detected by the camera, it will upload the video to FTP server.
It may take the system a few minutes to upload the video to FTP. Please wait with patience.
If FTP set up in DVR system fails, please check the information below.
1. make sure you can use user name and password to log in FTP.
2. make sure the Directory name is not /. Because DVR can‘t upload the video to the root of FTP.
3. remove special characters in user name, password, directory name to have a try.