Applies to: I41HG/I41CS
Nova S can be added to DVR so that the recordings from Nova S will go to the hard drive installed inside DVR.
Here is the example of how to add Nova S to DT81GB.
1. Connect Nova S to the router wirelessly via an app named annke nova.
you can refer to these links below to connect Nova S to phone.
2. Connect DVR to router with an ethernet cable. (PS: Nova S and DVR should be connected to the same router.)
3. Go to DVR‘s settings, and then add Nova S.
3.1 Pls go to configuration-camera management-camera, click custom adding at the right corner.
3.2 Choose the channel where the nova s is plugged into and then input the password of this camera. (PS: password is the verification code at the bottom of the camera, which is 6 capital letters, and should be input as capital.)
3.3 click add, then you will see that this device has been added successfully, and you can see a play icon where you can find the camera‘s status.
3.4 Pls go back to the main screen. and then choose a 4*4 display pattern at the top toolbar, then, you will see all analog cameras and nova s (I41HG).