Annke Sight - How to connect system to CMS?

Applies to: NW41V/N441H/N441K/N28WEB/N441B/N441D/N441L/N44PAN/N44PAJ/N34WDB/N34WDD/N44WEB/N44WED/N44WEC/NW41V/N44WBD/N48WHP/N48WHE

Purpose: If the Annke Sight software can't work well for you, you could try this CMS software for the computer remote view.

Here are the steps for you:

1. Power on NVR and connect the recorder to the router by network cable.
   
   

2. Go to the NVR menu System Setup--Network Setup to check if the P2P status is online. It must be online if you want to view the NVR video remotely on this software.
   
   If it is offline, please refer to the link below to make it online at first. 
   https://help.annke.com/hc/en-us/articles/360000253982-What-to-do-if-P2P-shows-offline-JA-

3. Download CMS and install it into your computer. Here is the software download link. 
   support.annke.com/document/others/N441B/client/CMS.exe

4. Go to the CMS Setting--Add device and input system‘s information to add system.
   
   
   
   
   

5. Finally, go to preview and click open all and you can see the image.