Applies to: N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y
If your NVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used for network access. Prior registration with your ISP is required before configuring the system to use DDNS.
- Enter the Network Settings interface. Menu > Configuration > Network
Select the Extranet Access tab to enter the DDNS Settings interface, as shown below.
- Check the DDNS checkbox to enable this feature.
- Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and HiDDNS.
IPServer: Enter Server Address for IPServer.
Enter Server Address for DynDNS (i.e. members.dyndns.org).
In the NVR Domain Name text field. enter the domain obtained from the DynDNS website.
Enter the User Name and Password registered in the DynDNS website.
Enter the User Name and Password obtained from the PeanutHull website.
Enter the account information in the corresponding fields. Refer to the DynDNS settings.
Enter Server Address for NO-IP.
In the NVR Domain Name text field, enter the domain obtained from the NO-IP website (www.no-ip.com).
Enter the User Name and Password registered in the NO-IP website.
The Server Address of the HiDDNS server appears by default:hiddns.com.
Enter the Device Domain Name. You can use the alias you registered in the HiDDNS server or define a new device domain name. If a new alias of the device domain name is defined in the NVR, it will replace the old one registered on the server. You can register the alias of the device domain name in the HDDNS server first and then enter the alias to the Device Domain Name in the NVR; you can also enter the domain name directly on the NVR to create a new one.
Click the Apply button to save the settings.
After setting all the required parameters for the DDNS, you can view the connecting status of the device by checking the Status information.