Applies to: I81FB/I81EB/I81EC/I91BE/I51DJ/I51DB/I51DK/I91BD/I91BF
Purpose: If you have no NVR system and just would like to have the IP camera as a standalone camera, it is OK for the live view on the APP. Only the POE cameras with built-in SD card slot can store recordings.
Here are the steps for you:
If you confirm that the Live view of a camera is enough for you, and please kindly follow the below guide to set the camera up on the mobile phone.
First of all, please mare sure the POE camera is actiavated. If not, please refer to this instruction before going ahead:
<Annke Vision - How to Activate ANNKE IP Camera via Web Browser Without DVR/NVR>
- Please directly connect the cameras to your router. If your router is the standard router, you need to have an adapter(12V/1A) to power the camera on, then connect it to the router with the ethernet cable. If your router is a built-in POE switch, you can directly connect it with the ethernet cable without additional power supply.
- When the camera is powered on and connected to the router successfully, the camera is ready to connect to the APP. Please download the APP Annke Vision and finish the account registration.
- Click the Add button to add the cameras to your APP, and you could directly scan the QR code on the camera label.
Note: If there is no QR code on the label for the camera, please try to input the SN manually on the APP.
- After that, please follow the steps to add the camera to the APP:
- Then, the APP will ask you to activate the system by creating the password and the verification code.
Note: The password and verification code is very important for the camera.
- Finally, you could view the camera's image on the APP as below.