Applies to: DW81KD
Purpose: The article will introduce how to set up the 24 hours recording. Please note that this instruction only works for the model DW81KD.
Before you start the setting:
Kindly please confirm that if you have installed the HDD inside the box? If not, Kindly please follow the guide here:
1. When confirmed HDD is successfully installed the HDD inside the box, you can check the HDD setting.
Please go to "Setting"-"record"-"Storage" to check the status. If the status shows "R/W", that means the status is normal.
If the HDD status is "error" or other messages, you can init it to make it work normally:
2. Please notice that the system default setting continues recording. If nothing changes you can directly leave it as default.
Please go to "Setting"-"Record"-"Schedule":
Please directly enable the schedule first, Then click the continuous, then drag the time in the schedule.
You could also click the "Edit" to select the recording time.
After that, the blue bar will be shown on the record page. That means you have set up 24 hours recording.
3. When finish the setting in one channel, You can directly click "copy" to all channels.
You could also set up the camera one by one.