Purpose: You could set up an email alert to receive the motion notification.
Here are the steps:
- Please use the Gmail address, not Yahoo nor Hotmail.
Check system P2P status and make sure it is online. Log into the Annke DVR/NVR system, go to Menu-->Network-->ANNKE Vision. Make sure the status is 'Online'.
Note: If the status is 'Offline,' please refer to this instruction to make it online at first:
What to do if P2P status shows offline? (DW81KD New Series)
Log in to your Gmail account on the computer.
Open the website below and make sure the Less Secure app is turned on.
Go to the Setting--Network--Email and Set up an email alert like the picture below.
The SMTP server is smtp.gmail.com
The user name is your Gmail account
SMTP port is 587 or 465
Tick the SSL/TLS
Tick the Attached Picture
The password is your Gmail password
The sender can be your Gmail account
The sender‘s address is your Gmail account
The receiver can be your Gmail account
The receiver‘s address can be your Gmail account
Go to Menu-->Camera-->Smart Event to enable motion detection and Notify Surveillance Center. Then you will receive a notification via email when there is motion detection on the system.
If you still can not receive the notification, please contact firstname.lastname@example.org.