Applies to: N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/NCK800/H800/H500
Purpose: Sometimes you need to configure the settings of the IP cameras separately via the NVR. You can follow the guide to do some setting.
Here are the steps for you:
- Connect your computer to the same network as the NVR. Then access the system menu of the NVR on the monitor or TV screen and go to 'Configuration→Network→General to find the NVR`s IPv4 address.
- Type in the IPv4 address of the NVR in the web browser, then go to the Configuration--Network--Advance settings--Others, then tick on the "Enable Virtual Host".
- Go to Configuration--System--Camera Management, you can find there is a URL link for each camera. Click the link, then you can directly go to the camera`s setting page.
- The user name is admin. The password is the NVR's password.