Applies to: N48PAW/N46PCK
Purpose:
This article introduces how to check the camera version on the NVR. You can check the firmware version of the camera to see if there is a new firmware that you can upgrade the camera with.
Before You Start:
1. Please connect your Network Video Recorder to your monitor by using a HDMI or VGA cable.
You can use a TV or computer as the monitor.
2. Please connect your camera with your video recorder, here is the link for your reference:
ANNKE VISION - Adding ANNKE POE Camera to ANNKE POE NVR (by a direct connection of ethernet cable)
Steps:
Go to the configuration>click expert mode in the left corner>camera>ip camera>please drag the slider to the right. And you can find the firmware of the cameras.
Comments
0 comments
Article is closed for comments.