Annke Vision - How to Reset ANNKE POE Camera's to Inactivate or Reset its Password? (Without NVR)

Applies to:
I81FB/I81HC/I91BK/I81HB/I51DE/I51DF/I51DK/I51DB/I51DD/I51DJ/I51DL/I51DN/I51DM/I51DP/I91BF/I91BE/I91BG/I91BM/I91BN/I91BL/I41BK/B1200/NC400/CZ400 

We can use the SADPTool or the reset button to reset the camera.

Here are the steps:

SADPTool
1. Connect the camera to a 12V DC power supply (must be 12 Volt, can be 1 Amp or above) and to a broadband router by ethernet cable.

2. Get a windows computer that is connected to the same router. Install software. Here is the software download link.

For Windows: https://download.annke.com/document/Computer_Software/SADPToolV3.0.3.3.zip

For Mac: https://download.annke.com/document/Computer_Software/SADPTool.pkg.zip

3. Run the software and it will detect the camera‘s IP.

4. Select the camera‘s IP and click forget a password at the right bottom of the software.

5. Click export and select the path to export a file.

6. Send us the file and we will give you another file after we receive it.

NOTICE:

1. DON‘T REBOOT system after you exported the file.

2. We will send you a file back in one business day.

3. The file we send back to you will be invalid after 48 hours since you export the file.

7. Select import and select the file we send to you.

Input the new password and confirm the new password of the camera.

Camera reset button

Please find the reset button of your camera near the SD card slot. 

The pictures below are to help you find the reset button.

Turret camera:

Bullet camera:

please follow the below steps to reset the camera:
1. Disconnect the camera from the power
2. Press and hold the camera reset button
3. Connect the camera to the power
4. Keep holding the reset button for 25 seconds
5. Release the reset button