Applies to: I41HG/I41CS
Nova S(I41HG) supports RTSP, you can play on the Blue Iris.
1. Make sure Nova S(I41HG) has connected to the same network of the computer;
2. Installing the IPC search tool “SADP” on your computer, install Blue Iris;
SADPTOOL download link:support.annke.com/document/HK/general/tool/SADPTool.exe
3. Open SADP and search IP address of IPC.
4.Click the icon “+” to add device in the upper right corner when you opened the Blue Iris, as shown in the figure below.
It Will pop up a dialog box and prompt you to add device. Full Name can be anything to select “Network IP” by default and then click “OK” to save the settings, as shown in the figure below.
It will prompt you to input the IP address when you go to the next step, click “OK” after completing the input, then you can watch the live video, the format is:
Username: admin (default)
Password: password is the verification code which you can find it on the label at the bottom of this camera, such as “ARGDAK”.
IP: The IP address of the camera which you can find it on SADP, such as “192.168.133.48”.
Port: 554 (default)
Codec: H264 (MPEG-4、mpeg4)
Channel: CH1 (or the channel which you want to add it to, such as CH2)
Subtype: main (sub)
For example: rtsp://admin:ARGDAK@192.168.133.48:554/H264/ch1/main/av_stream