Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/S500/S300/FC200NCK800/H800/H500
Purpose:
You can set the zone name, the zone type, the detector type, the entering delay time, the exiting delay time, the zone bypass and the linked camera.
Steps:
On the Partition page, tap on the right the zone name in the Zone field to enter the Settings page.
Note:
For details about adding zone, see Adding Zone.
For details about deleting zone, see Deleting Zone.
For details about setting zone name, see Setting Zone Name.
For details about setting zone type, see Setting Zone Type.
For details about setting detector type, see Setting Detector Type.
For details about setting zone bypass, see Setting Zone Bypass.
For details about linking camera, see Linking Camera.
Comments
0 comments
Article is closed for comments.