Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/S500/S300/FC200/NCK800/H800/H500
Purpose:
You can set the single zone status as arm or disarm.
Steps:
-
Select a zone and tap
to disarm the zone.
Note: By default, all zones under the partition are armed. -
(Optional) It is also available to stop the alarm by tapping Clear Alarm.
- (Optional) Or tap Delay to set the entering delay time and the exiting delay time.
Note:
The function should be supported by the device.
Before you start: Enable the single zone arming or disarming function in the Annke Vision Control Client.
Comments
0 comments
Article is closed for comments.