Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT41DB/DT61EQ/DW81KD/DW61LD/DT81DP/N48PI/N46PI/N44PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/I41HG/I41CS/NCK800/H800/H500/E800/S500/S300/FC200/FC800
Purpose:
After adding the Mini Trooper base station to the client, you can sync more Mini Trooper cameras with the base station if less than 6 cameras have been linked. You can also manage the batteries of the Mini Trooper cameras.
Before You Start:
Add Mini Trooper base station to the client. See Adding Mini Trooper to the Client for details.
Synchronizing More Cameras
Steps:
- Enter the Annke Vision page, and then enter the Settings page in one of the following ways.
- Option 1: On the Annke Vision page, if you are in the list mode, slide the device's name to left and tap
.
- Option 2: On the Annke Vision page, if you are in the thumbnail mode, tap the device's name or tap
.
- Option 3: Enter the Live View page. Tap
and tap Settings.
- Option 1: On the Annke Vision page, if you are in the list mode, slide the device's name to left and tap
- Tap Linked Camera to enter the Linked Camera page.
- Tap
.
- Follow the prompts to sync more camera(s) with the base station.
- Note:
- For details about how to sync the camera with the base station, see the Mini Trooper User Manual.
- You can sync up to 6 cameras with each base station.
- Note:
Managing Battery
Steps:
- Enter the Annke Vision page, and then enter the Settings page in one of the following ways.
- Option 1: On the Annke Vision page, if you are in the list mode, slide the device's name to the left and tap
.
- Option 2: On the Annke Vision page, if you are in the thumbnail mode, tap the device's name or tap
.
- Option 3: Enter the Live View page. Tap
and tap Settings.
- Option 1: On the Annke Vision page, if you are in the list mode, slide the device's name to the left and tap
- Tap Linked Camera to enter the Linked Camera page.
- Select a linked Mini Trooper camera, and then tap to enter the following page.
- (Optional) Check the remaining power of the battery and the signal intensity of the camera.
- Tap to enter the Battery Management page.
- Select Power Saver, Balanced, or High Performance as required.
Power Saver: Uses the least power but provides a low-quality image.
Balanced: Uses less power and provides a medium-quality image.
High Performance: Provides high-quality image, but uses more power.
Comments
0 comments
Article is closed for comments.