Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT41DB/DT61EQ/DW81KD/DW61LD/DT81DP/N48PI/N46PI/N44PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/I41HG/I41CS/S500/S300/FC200/NCK800/H800/H500/E500/E800
Purpose: You can configure the LAN (Local Area Network) advanced settings of the Mini Trooper base station, including enabling/disabling gateway light (the indicator light of the base station), restoring the base station to default settings, changing login password for the base station, etc.
Before You Start: Add a Mini Trooper base station to the client. See Adding Mini Trooper to the Client for details.
Steps:
- Enter the Annke Vision page, and then enter the Settings page in one of the following ways.
-
Option 1:
On the Annke Vision page, if you are in the list mode, slide the device's name to left and tap
.
-
Option 2:
On the Annke Vision page, if you are in the thumbnail mode, tap the device's name or tap
.
- Option 3:
Enter the Live View page. Tap
and tap Settings.
-
- Tap LAN Advanced Settings.
-
On the Connect to Device's Network, tap Change Network to change your mobile phone's network to the network of the base station.
- Note:
To configure the LAN advanced settings of the Mini Trooper base station, you should change your phone's network to the network of the base station.
- Result:
You enter the Advanced Settings page.
- Note:
- On the Advanced Settings page, you can perform the following operations.
-
Set the switch to On/Off to enable or disable gateway light (indicator light of the base station).
-
Tap Gateway Reboot to reboot the base station.
-
Tap Restore Default Settings to restore the base station to the default settings.
-
Tap Change Login Password to change the password of the base station.
-
Select a time zone as the time zone of the base station.
-
Tap About Device to view the base station information including serial number, system time, system version, etc.
-
Comments
0 comments
Article is closed for comments.