Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT41DB/DT61EQ/DW81KD/DW61LD/DT81DP/N48PI/N46PI/N44PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/I41HG/I41CS/S500/S300/FC200/NCK800/H800/H500/E500/E800
Purpose:
You set the access control device's door open duration. The door will open for the configured time duration.
Note: The function is for access control device only.
Steps:
- Enter the Annke Vision page, and then enter the Settings page in one of the following ways.
-
Option 1:
On the Annke Vision page, if you are in the list mode, slide the device's name to left and tap
.
-
Option 2:
On the Annke Vision page, if you are in the thumbnail mode, tap the device's name or tap
.
- Option 3:
Enter the Live View page. Tap
and tap Settings.
-
- On the Settings page, tap Door Open Duration to open the Door Open Duration panel.
-
Select a door open duration from the list.
- Tap
to confirm the settings.
If you tap Door Open in the door control page, the door will open for the configured time duration.
Comments
0 comments
Article is closed for comments.