Applies to:
DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB//DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/S500/S300/FC200/NCK800/H800/H500/C800/C500/B1200/NC400/CZ500/CZ400/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS
Purpose:
You can edit the local device information, including the device alias, address, and port No. You can also edit the device alarm output, remote configuration, remote controller, or upgrade the device. Enter the Device Information page:
-
Option 1:
On the Annke Vision page, if you are in the list mode, slide the device's name to left and tap
.
-
Option 2:
On the Annke Vision page, if you are in the thumbnail mode, tap the device's name or tap
.
- Option 3:
Enter the Live View page. Tap
and tap Settings.
Note:
-
For details about editing local device information, see Editing Device Information.
-
For details about deleting device, see Deleting Device.
-
For details about generating QR code, see Generating QR Code.
-
For details about remote configuration, see Remote Configuration.
-
For details about remote controller, see Remote Controller.
-
For details about device upgrading, see Upgrading Device.
Comments
0 comments
Article is closed for comments.