Annke Vision-How to Find The Encryption Password / Verification Code?

Applies to:

DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/S500/S300/FC200/NCK800/H800/H500/CZ400/CZ500/C500/D961BB/D981BB

Introduction:

When the user is viewing the live view on the APP, it is required to enter the encryption code first. The encryption code is the verification code that the user sets up when activating the device for the first time, which can make your security system more secure. In this article, we will show you how to find the encryption code.

Steps:

Please access the system menu on the monitor or TV and go to System Configurations→Network→Annke Vision.

For AI Detection DVR, go to System Configurations→Network→Advanced→Platform Access.

For the old version of the ANNKE DVR/NVR system, please go to System Configurations→Network→Platform Access.

For the new H800 (N46PCK/N48PAW) NVR system, please go to System Configurations→Network→Annke Vision.

For blue and white interface, please refer to image below:

2. If you have a standard alone POE camera and the camera is not connected to the NVR system, please access the setting menu of the camera on the web browser from the PC and go to Configurations→Network→Advanced Settings→Platform Access.

Please refer to the link below to find detailed instructions about how to access the setting menu of the camera on the web browser from the PC.

https://help.annke.com/hc/en-us/articles/900003867006

Notice:

For any other questions, please contact ANNKE technical support at support@annke.com by email.

If this article is helpful to you, please click the "helpful" button after you review it. Any comments would be appreciated.