Some of the cameras' function can only be configured in their indivisual setting page. Below is the instruction to enter Annke's IP cameras' indivisual setting page.
Connect your IP camera and your computer to the same network/router. The connection can be either via ethernet cable or WiFi.
Find the IP address of your IP camera. The procedures depend on your computer.
a). If your computer is NOT a Windows computer: Please access to your router to find the camera's IP address (you may need to contact your router's seller for further information).
b). If your computer is a Windows computer: You can use the software called SADPTOOL to find the IP address. Below are the steps:
b-1). Please download and install the software SADPTOOL.exe to your computer:
b-2). Run the software and you will find the cameras's IP address on the device list.
b-3). Double-click on the IP address (or input it into your web browser manually) then you will see the camera's login page. Input the user name 'admin' and the camera's password to proceed.
b-4). Click on the Configuration tab to enter the camera's setting page.
Note: The web page layout may be a little different according to different camera models.