Applies to: N48PAW/N46PCK/H800
Purpose: You could set up an email alert to receive the motion notification.
- Please use the Gmail address, not Yahoo nor Hotmail.
Check system P2P status and make sure it is online. Log into the Annke NVR system, go to Menu--Configuration-->Network-->ANNKE Vision. Make sure the status is 'Online'.
Note: If the status is 'Offline,' please refer to this instruction to make it online first:
Annke Vision - What to Do If The NVR(H800) Is Offline?
Log in Google account, go to 'Security', then turn on '2-Step Verification'. Click on 'App Password' to create your App Password (16 digits).
Go to the Setting-->Network-->Email and Set up an email alert like the picture below.
Email Address is your Gmail address
Email Password is your App password (16 digits) from Google
SMTP Mode is General
SMTP Server is Gmail
SMTP port is 587 or 465
Tick the SSL/TLS
Tick the Attached Picture
Sender can be any name
Sender's address is your Gmail address
Receiver can be any name
Receiver's address can be your Gmail account or any email you want to receive the email notification
- Go to Menu-->Camera--> Event to enable motion detection and set up the detection area.
- Go to 'Linkage Action' to enable 'Send Email'.
8. Click 'Apply' after the configurations.
For any other questions, please contact ANNKE technical support at email@example.com
If this article is helpful to you, please click the "helpful" button after you review it. Any comments would be appreciated.