Applies to: N48PAW/N46PCK/H800
Purpose: You could set up an email alert to receive the motion notification.
- Please use the Gmail address, not Yahoo nor Hotmail.
Check system P2P status and make sure it is online. Log into the Annke NVR system, go to Menu--Configuration-->Network-->ANNKE Vision. Make sure the status is 'Online'.
Note: If the status is 'Offline,' please refer to this instruction to make it online first:
- Log in to your Gmail account on the computer.
Open the website below and make sure the Less Secure app is turned on.
Go to the Setting-->Network-->Email and Set up an email alert like the picture below.
The SMTP server is smtp.gmail.com
The user name is your Gmail account
SMTP port is 587 or 465
Tick the SSL/TLS
Tick the Attached Picture
The password is your Gmail password
The sender can be your Gmail account
The sender's address is your Gmail account
The receiver can be your Gmail account
The receiver's address can be your Gmail account
- Go to Menu-->Camera--> Event to enable motion detection and set up the detection area.
- Go to 'Linkage Action' to enable 'Send Email'.
For any other questions, please contact ANNKE technical support at email@example.com
If this article is helpful to you, please click the "helpful" button after you review it. Any comments would be appreciated.