Viewing remote cameras on local NVR
I have set up 2 NVR's with 8 cameras each on 2 separate buildings. I would like to be able to view all 16 cameras on one monitor, but not needing to record all of them, as they will record on the local NVR. Just viewing.
I am certain it is possible through IP addresses, but would need some step by step guide
-
Hi thanks.
Yes that is the way I thought, but I wondered if I could use the NVR monitor, rather than smart device or PC screen.
I would assume it can be done with TCP IP addresses to find the cameras?
So first 8 cameras shown are the 8 fitted locally, the other 8 are in a different building, different broadband connection. It’s a 16 channel nvr, so will give a 4x4 display of all cameras. -
Dear Customer,
Have a nice day.
We apologize for the inconvenience.
In this situation, we cannot view the camera feeds from two NVRs connected together on a single monitor.
Furthermore, viewing all camera feeds via IP address on a computer requires both NVRs and the computer to be connected to the same router's network.
If you want to view the all camera feed on your computer, we recommend adding the device to the Annke Vision software via a p2p method.
https://help.annke.com/hc/en-us/articles/8426542605977---Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud)
If you are using an imac computer, please download guarding vision instead of annke vision.
https://help.annke.com/hc/en-us/articles/4405215514905---Access the DVR/NVR/IP camera via Guarding Vision software on PC (Via P2P Cloud)
And if you have any questions, do not hesitate to contact us at support@annke.com.
Best regards！
Echo | Technical Support
Please sign in to leave a comment.
Comments
3 comments