Annke Vision -- How to Make the Smart Dual Light IP Camera Light When Detecting Human

Applies to: DW41JD/DW81KD/DW61LD/DT61BS/DT81DX/DW81KN/DW81KM/DW61LN/DW41LN/D961BB/DT81DW/DT81BH/DT81DX/DT81DP/DN31GN/DT41BG/DT41BH/DT81BG/DN81R/DN41R/DN61R/DT41Y/DT61Y/DT81Y/DT61BS/DT61BG/D941BB/DX31NBDG81BG/D961BC/D981BB/CT1FE/C51EK/CT1FF/C51EJ/C51EP/C51BH/C51EF/C51BW/C51BG/CT1GV/CR1FC/C51DK/CT1GT/CR1BG/CR1CY/CR1CJ/CR1CV/C51BN/CR1DR/CR1DD/CR1DB/CT1GK/C51BL/CT1GU/CT1GJ/C51BM/CR1CW/CS1EQ/CR1CX/CR1CZ/C51EZ/CR1BL/CS1ES/CT1DW/C51BY/CT1GS/CR1BV/CT1DL/N481Y/N481Y/N44PI/N48PI/N46PI/N48PBB/N98PBL/N48PAW/N98PBK/N46PCK/N88PCH/N931BB/N96PBH/N98PBH/N96PBD/N44PAM/I51HM/I51DS/I91ET/I91DX/I91EV/I51HD/I51DX/I51DM/I91DM/I91DF/I91DL/I91EP/I71EJ/I51EX/I51HP/I51EH/I91BM/I51FX/I51DL/I91DD/I51EM/I51DL/I51DS/I51FW/I91BS/I91EU/I91EW/I51FS/I51DW/I91DN/I91DH/I51DN/I51DN/I81HY/I91DW/I91DQ/I51CE/I81EM/I81HT/I91DG/I91BK/I91BH/I91DE/I81HS/I91BL/I51EL/I91ES/I91BV/I91BN/I91DB/I51FV/I51EG/I81HX/I81HD/I81HM/I91BI/I91DS/I91DU/I51HJ/I91HJ

Purpose: Reduce light pollution while serving as a warning

Note:
1) It only can work with smart dual-light IP cameras.

2) The function only can work at night. 

3) If you want the function to work all day, you need to keep the Day/Night mode in night mode but unless there is a human and vehicle detected, or the picture will be black and white all day in the night setting.

Steps:

1. Please access the web interface of the camera:

If you use the camera alone, please follow the link below:
https://help.annke.com/hc/en-us/articles/900003867006

If you connect the camera to the NVR, please follow the link below:

https://help.annke.com/hc/en-us/articles/900006140806

2. Please follow the pictures to set up the light mode:

3. Please follow the pictures below to enable human detection and schedule:

4. Now the camera will light when detecting humans. Explore and have fun :)

If you have any problem, please contact our technical support at support@annke.com.