This FAQ will guide you how to change resolution for your DVR's interface.
1. Right click the mouse on the monitor and left click to choose "Menu" option.
2. Click "Configuration" option.
3. Go to System->General->Basic Settings to find the VGA/HDMI Resolution option. Choose the resolution you want and click "Apply" to apply the resolution.
Note: output resolution should be no higher than your monitor's resolution.
If you accidentally change your resolution and your monitor shows no signal with black screen, please refer to instruction below to access web interface of your system on a computer in the local network.
https://help.annke.com/hc/en-us/articles/4406902024217
And go to Configuration->System->System Settings->Menu Output to change output resolution:
Comments
0 comments
Article is closed for comments.