Applies to:
DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP
Purpose: There is no speaker nor a microphone in the DVR/NVR recorder. In order to record the sound of the system, please knows that you need to buy a microphone and a speaker to install the DVR/NVR audio in and out.
Note: Each camera needs an individual audio-in port. (If the DVR/NVR has only one audio-in port, then only one camera can record with sound)
Here are the steps for you:
- Make sure your DVR has RCA red audio cord at the back of the DVR.
- Hook up an external microphone to DVR by audio cable.
- The microphone should be put next to one camera so that that camera‘s image and sound are synchronized.
- Connect a long audio cable to the microphone and DVR‘s audio-in port. Also, you can also connect a speaker to the audio-out port of the DVR.
- Finally, you could go to the DVR Menu--Record--Parameters --More setting to enable the Record Audio.
To get sound on the TV, computer, and the APP, you need to enable the speaker and microphone.
a). On the DVR/NVR from TV/monitor access
b). On the Annke Vision APP
c). On the IE browser
d). On the computer software Guarding vision
Notice:
If you have any other questions, please feel free to contact ANNKE technical support at support@annke.com by email for further help.
If this article is helpful to you, please click the "helpful" button after you review it. Any comments would be appreciated.
Comments
0 comments
Article is closed for comments.