Applies to:
DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41GB/DT81GB/DT41DB/DW41JD/DW81KD/DW61LD/DT81DP//N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N48PBB/S500/S300/FC200/NCK800/H800/H500/E500/E800
Purpose: This instruction is to help you set up schedule recording for the system via the web page.
Steps:
1. Please get a windows computer which is in the same network area as the camera is. In other words, the camera and computer must be connected to the same router, by cable or by wifi.
2. Install the software on the computer. Here is the download link.
https://download.annke.com/CMS/SADP_v3.0.2.4.zip
4. Run the software to detect the system's IP.
5. Please copy the IP address on the SADP tool and access the DVR/NVR page. Please use Internet Explorer.
6. Please click Configuration-->Storage Management to check the status of HDD. It should be normal.
7. Please go to the Schedule Settings to select the recording time. Then please click "Save" to save the setting.
8. After that, you could go to playback to playback video.
Comments
0 comments
Article is closed for comments.