Applies to: N44PS/N48PS
The beeping always caused by the settings, when you hear regularly beep, would you pls follow the steps below to check?
1. Please go to setting-event.
2. There are many options that might cause buzzer, so you need to check it one by one.
Firstly, pls go to abnormality, to check the HDD event, pls do not tick enable.
All these three events under HDD should be unticked.
Secondly, pls go to network, unticked the enable for all the network events.
Then, we need to go to setting-event-alarm, do not tick enable for all the alarm, like the pictures below.
Comments
0 comments
Article is closed for comments.