Annke Vision - Set up Recording Schedule on Annke DVR/NVR

Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/NCK800/H800/H500

Purpose:

Set the scheduled recording, and then the camera will automatically start/stop recording according to the configuration of the schedule.

Before you start: 

• You should log in to your DVR/NVR.
• Click Menu> Record>Schedule

The interface of Record:

Camera: choose the camera you want to configure.

Enable Schedule: Must Tick the checkbox and enable the recording schedule.

Edit: Edit the schedule, the detailed description shows below.

Different recording types are marked in different color icons.
Continous: scheduled recording.
Event: recording triggered by all event-triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
M/A: recording triggered by either motion detection or alarm.
M&A: recording triggered by motion detection and alarm.

 Edit the schedule: click the Edit button.

• Weekday: Choose the day to which you want to set a schedule. (Monday to Sunday)
  
  Note:
  The Holiday option is available as the Weekday Type when you enable holiday schedule in Holiday settings.
  It is as the highest priority: The system will give priority to carry out the holiday setting plan, the other Monday to Sunday setting plans will be invalid. (How to enable holiday recording?)
  
  
  
• To schedule an all-day recording, check the All Day item checkbox.
• To arrange another schedule, leave the All Day checkbox blank and set the Start/End time.
  
  
  
  Notes:
  Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.
  Repeat the above steps to schedule a recording for other days in the week. If the schedule can also be set to other days, click Copy.
• Select the record type in the drop-down list (Continuous, Motion).
  
• Click Apply to save the settings and then click OK to back to the upper-level menu.