Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP /S500/S300/FC200
Purpose: After the adding of the IP cameras, the basic information of the camera lists on the page, you can configure the basic setting of the IP cameras.
Before you start:
- You have logged in to your DVR.
- Click Menu > Camera > Camera, and enter the Camera Management interface.
Steps:
- Click the IP Camera tab into the IP camera setting page.
- Choose an IP camera and click the
icon to edit the parameters. You can edit the IP address, protocol, and other parameters.
IP Camera address: The IP Camera connected well will automatically assign an IP address.
Protocol: The default protocol is IPCAM, you can change from the drop-list.
Management Port: The default management is 8000.
Channel-Port: If the connected device is an encoding device with multiple channels, you can choose the channel to connect by selecting the channel port No. in the dropdown list.
Transfer Protocol: You can choose Auto or Manual for the transfer protocol.
If you want to change the info, you should input the Admin Password. - Click OK to save the settings and exit the editing interface.
Comments
0 comments
Article is closed for comments.