Annke Vision - How to set up motion detection recording?

Applies to:
DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DW41JD/DW81KD/DW61LD/ DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH

Purpose: You could setup motion detection for your system.

Steps:

1. Please go to HDD-General  and make sure there is a hard drive in recorder and the status is normal.

If the status is abnormal or other status, please refer to this instruction to make it normal first.
https://help.annke.com/hc/en-us/articles/360000252901

2. Go to record--schedule to set up motion detection recording.

3. Go to Camera--Motion to enable motion detection.

4. Go to Menu-Playback to play motion detection recording.