Applies to: NW41V/N441H/N441K/N28WEB/N441B/N441D/N441L/N44PAN/N44PAJ/N34WDB/N34WDD/N44WEB/N44WED/N44WEC/NW41V/N44WBD/N48WHP/N48WHE
Purpose: Motion detection recording means NVR will record automatically when it is triggered by movement.
NOTE: The DVR needs an internal hard disk drive for recording. Without the hard drive, the system can show live viewing, but can’t record, playback either.
Here are the steps for you:
1. Go to Record Setup-->Record Plan choose the channel, set the weekday, set the time schedule, and check the "Motion". Then click "Apply" to save the config.
2. Go to the Channel Setup-->Video Detection to enable Motion Detection. Please adjust higher the Sensitivity at the beginning and set the detect area. Remember to click "Apply" to save the config.
Tips: If you want to playback the recording, please click here.
Comments
0 comments
Article is closed for comments.