Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/S500/S300/FC200/NCK800/H800/H500/E500/E800
Purpose: When using the app for the first time, you have to register an Annke Vision account.
Before you start: You have installed the app on your mobile phone. (How to install Annke Vision App on your phone?)
- Tap the icon on your phone to run the app.
Tap Select Region or Country to enter the Region page for the first time.
- Tap the tick on the top-right corner to save the settings after selecting a country or region.
Please choose the correct country/region according to the location of the camera system. Otherwise, the camera added to this account will not be able to be viewed.
- The app will go to the Annke Vision page automatically.
- Tap Login to enter the Login page.
- Click "Register" and go to the register page.
- The app will then go to the registration page.
Tap the below "Register by Email Address" and switch to the email address registration page.
- Input your email address and tap the "Get Security Code" to receive the security code.
The security code will be sent to this email address.
If you want to register by phone number, please turn to registration by phone number.
- Input the received security code and click "Next" to continue.
Note: The email of the security code may be delayed. If no email received, tap Get Again after the 60s to receive the security code again.
- Enter the password and click "Finish" to finish the registration.
- After the registration is finished. The app will go to the Annke Vision page again automatically.
If you find this article helpful, please click 'Yes' at the end of this article;
If you have any suggestions or questions for this article, please leave a comment in the below comment zone.
Article is closed for comments.