Annke Sight - How to Connect the camera without the NVR to the Annke Sight APP？

Applies to: I71GK, I91FB, I51CH, I51CN, I71FR, I51CH, I91FK, I71FU, I51CJ, I91FL

Purpose: You can access the camera on the app remotely.

Steps:

1. Download the Annke Sight app

Android app (Annke sight)

https://download.annke.com/app202012/AnnkeSight3.3.29.apk

2. Run the app Annke Sight on your phone and click Register to register an account by email or phone No. At first. Then please log in to the new account.

Please note that if the camera has previously been connected to an NVR, you must first delete the corresponding camera from the NVR, or reset the camera on a computer using the IPCamsuit tool. Only after doing this can you add the camera separately to the app.

Below are the instructions for resetting the camera using a computer. After resetting the camera, please disconnect the network cable.

Please make sure that the camera has been deleted from the NVR. If it has not been unbound from the NVR, you will not be able to add it separately to the app.

Please download the ipcamsuit software and reset the camera into factory default:

https://download.annke.com/document/Computer_Software/IPCamSuite-1.2.26.8.exe

Then connect the camera to the same router as your computer like image below:

On the software please reset the camera:

3. Please follow the steps below to add it to the app:

Please turn on your phone's Bluetooth and ensure that the camera and your phone are on the same network.

Please use the camera to scan the QR code on the APP.

This means the camera is added successfully:

If the above method didn't work, please click the "scan" and use the phone to scan the camera's qr code from the camera's label to add the camera:

This means the camera is added successfully:

If the above method doesn't work, please reset the camera as above and then add it again to see if it works.

If you can't add to the APP successfully, please send an email to support@annke.com for help.