Applies to: DW81KD/DW61LD/DW41JD/S500
When the user wants to reconfigure the NVR, a factory reset is a good choice. You could refer to this article to find detailed instructions.
1. Access the system menu on the monitor and go to 'Maintenance'.
2. Select 'Factory Defaults'.
3. The NVR will reboot after the factory reset and needs to be activated again.
If you have any other questions, please contact ANNKE technical support at firstname.lastname@example.org by email.
If this article is helpful to you, please click the "helpful" button after you review it. Any comments would be appreciated.