Annke Vision - How to Set up Email Alert for ANNKE POE Cameras via Computer Browser (Without NVR)

Applies to:  I81FB/I81HC/I91BK/I81HB/I51DE/I51DF/I51DK/I51DB/I51DD/I51DJ/I51DL/I51DN/I51DM/I51DP/I91BF/I91BE/I91BG/I91BM/I91BN/I91BL/I41BK/C800/C500/B1200/NC400/CZ500/CZ400

Purpose: When using the ANNKE POE Camera without NVR, we need to access the camera's webpage to set up the email alert.

Before this instruction:

1. Connect the camera to a 12V DC power supply and to a broadband router by ethernet cable.

2. Run the SADP software on a computer in the local network. SADP will show the camera's IP address. Input the IP address in the IE browser (short for Internet Explorer browser).

3. Input the username and password of the camera to log in to the camera's webpage.

Steps:

1. You can use Gmail to set the email alert function.（Google Mailbox is only used to use SMTP service. It needs to be set up with Google Mailbox, but other mailboxes can be used to receive email alert. ）

2. Log in Google account, go to 'Security', then turn on '2-Step Verification'. Click on 'App Password' to create your App Password （16 digits）.

4. On the camera’s web interface, navigate to [Configuration—Network—Advanced settings—Email] and set up the email alert like the picture below.
[Sender] can be any name.
[Sender's Address] is your Gmail account.
[SMTP server]:

Gmail:  smtp.gmail.com 
[SMTP port]: 587/465

[Email Encryption] is ‘TLS’
[Enable STARTTLS] Tick this on
[Attached Image] is optional
[Interval] is 2s
[Authentication] Tick this on
[User Name] is your Gmail account.
[password] is your App password (16 digits) from Google
[Confirm] Input your App password (16 digits) from Google again
[Receiver] can be any name
[Receiver's Address] is your Gmail account or any email you want to receive the email notification
Click [Save] to apply the changes.
Click [Test]. If the test succeeds, the information input can work. Please go ahead with the below steps.

5. Navigate to Go to [Configuration—Event—Basic Events] to enable the email alert function. After you finish all, click apply to save all your setting.

6. Then you will receive notifications via email when there is motion detection on the camera.