Echo
- Total activity 482
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 233
Articles
Recent activity by Echo-
Annke Sight-What to do if the solar panel is not charging normally?
Applies to:N54WHF+I81BM/I81BM/I81BV/I51GV/TYN008Purpose: If a solar panel is connected to your camera but the battery level continues to drop, charges very slowly, or does not charge at all, please...
-
Annke Sight-What to do if the battery camera can not be fully charged?
Applies to:N54WHF+I81BM/I81BM/I81BV/I51GVPurpose: If your battery-powered camera fails to reach 100% after prolonged charging, the battery level increases very slowly, or remains stuck at a fixed p...
-
Annke Sight-What to do if the camera is close to the base station but still cannot connect?
Applies to:N54WHF+I81BM/I81BV/I51GV/I81BJPurpose: If your camera is close to the base station but still fails to pair or establish a stable connection, please follow the steps below to resolve the ...
-
Annke Vision - How to Set up Email Alert? (DW81KD V7)
Applies to:DW81KD V7 Purpose: You could set up an email alert to receive the motion notification. Here are the steps: 1. You can use Gmail/ Hotmail/ Yahoo etc. mailboxes to set the email alert ...
-
Annke Vision - How to Setup Motion Detection Recording? (DW81KD V7)
Applies to: DW81KD V7 Purpose: The article will introduce how to set up motion detection recording. Please note that this instruction only works for the DW81KD V7. Before you start the setting: Kin...
-
Annke Vision - What to Do If P2P Status Shows Offline? (DW81KD V7)
Applies to:DW81KD V7 Purpose: If you want to remotely access the Annke system via phone app or computer software, the system's network status must be Online. Below is the method to make the Annke N...
-
Annke Vision - How to add more DVR users? (DW81KD V7)
Applies to: DW81KD v7 Purpose: There is a default account in the DVR: Administrator. The Administrator user name is admin and the password is set when you start the device for the first time.The...
-
Annke Sight - How to Add a Camera to NVR with an Ethernet Cable?（For N48WHR New UI）
Applies to: N48WHR/N48WEE/N98WHRPurpose: The wireless NVR should be connected to the IP camera to acquire and record video. If the wireless connection to the ip camera fails, you can use the ethern...
-
Annke Vision-How to find verification code?
Applies to: DW81KD V7 Introduction: When the user is viewing the live view on the APP, it is required to enter the encryption code first. The encryption code is the verification code that the use...
-
How to configure Alarm input and output on the IP cameras
Applies to IP cameras with Alarm input and output interfaces, I91DB, I91BY, etc. 1. What is the difference between the Alarm input and Alarm output: 1. An Alarm input is an event outside the camera...