Applies to: N44PAM/N48PAW / N98PBK / N88PCH / N46PCK / N96PBD / N931BB / N98PBH / N96PBH / N961BB / N951BC / N48PBJ / N84PBH / DT81GB / DT61GB / DW41JD / DW81KD / DW61LD / DW41JT / DW81KT / DG81BG / DW41JW / DW81KN / DW81KM / DW61LN / DT81DP / DN31GN / DT41BG / DT41BH / DT81BG / DT81BH / D961BB / DT61BS / DT61BG / DN81BT / DX31NB / D981BB / D941BB / DT81DX / DT81DW
The reason you lose connection to your cameras when leaving your home network is that the device was previously added using its IP address within the LAN. In this setup, if your mobile phone is not on the same local network, you will not be able to access the device.
To fix this, please re-add your device using the P2P method. This will allow you to view your cameras from anywhere.
Here are the steps:
-
Delete the device from your ANNKE Vision app first. You can follow this guide for reference:
https://help.annke.com/hc/en-us/articles/4404036142873 -
Add the device again to your app using the P2P method by following the instructions here:
https://help.annke.com/hc/en-us/articles/360000252581
Once completed, you should be able to access your cameras from outside your home network without any issues.
Notice:
For any other questions, please contact ANNKE technical support at support@annke.com by email.
Comments
0 comments
Please sign in to leave a comment.