Applies to: I61FC/C800/C500/B1200/NC400/CZ500/ CZ400/ Pano360 Pro
The method is only for dome cameras like I61FC
1. Unplug the camera from NVR.
2. Use an instrument to loose 3 screws on camera‘s base.
Notice: the screw cannot be taken away but loose.
3. Open the round cover and find the reset button.
4. Use hand press and hold on reset button to reset the camera.
5. camera is reset and will show image on NVR.
Comments
0 comments
Article is closed for comments.