Applies to: I61DQ/I21AE/I21AF
If you reset the camera, the camera will come back to default and you need to set up everything again.
1. Plug camera into the power supply
2. Use a pin press and hold the reset button on the camera. Keep holding the reset button for 30 seconds and remove your hand.
I minute later, the camera will spin by itself until it stops after 30 seconds. You can see the LED will flash in blue color and the camera will rotate itself, which indicates reset succeeds.
For other models: I21AE, I21AF
If you want to reset the camera or insert the SD card in the camera but didn‘t find the button, You should use your hand to turn the lens up.
Pls press and hold the reset button on the camera. Keep holding the reset button for 1 minute and remove your hand. You can listen to a ‘hello‘ sound, which indicates reset succeeds.
Comments
0 comments
Article is closed for comments.