The DVR can connect IP camera.
But the IP camera should meet two requirements below.
1. The IP camera must support the ONVIF protocol.
2. The IP camera‘s resolution had better equal to or lower than the resolution DVR.
3. The camera should be connected to the router, by cable or by wifi. Therefore, a wireless camera is also OK.
Please follow the steps to set up:
1. Please use a network cable to connect the IP camera to the router, and connect the camera to the power source by adapter.
2. Connect the DVR to the same router by network cable.
3. Please go to Menu - Camera - IP camera to refresh the IP list to find the wireless IP camera. If it finds the camera‘s IP, click edit to input camera‘s password.
4. Click add. If the status is blue, it means the camera is connected successfully.
After that, you can see the IP camera’s image display on the screen.