Annke Vision - How to Adjust the Lighting Status of the PIR Camera?

Applies to: DW41JD/DW81KD/DW61LD/CT1BF/CT1DC/CT1DM/C51BG/CR1BM/CR1BN/CT1DL 

Purpose:
Please refer to the steps below to adjust the lighting status of the PIR camera. You can set it to flashing light (default mode) or steady light. You can also turn off the light.

Steps:
1. Log in the system first. Please go to the DVR system’s main interface, and click the “PTZ Control” button to enter the corresponding control interface.

You could also  go to the DVR Menu -- Camera -- PTZ, access "PTZ" settings, click "PTZ" button.

2. Please click the “Menu” button to enter the camera’s main menu.

3. Please click the “down” button until the green indicator bar jumps to “FUNCTIONS”. Then please click “Iris+” to enter the functions menu interface.

4. If you need to set the flashing white light to steady status, you can refer to the steps below:

Step 1: Please click the "Down" button until the green indicator bar jumps to the “ALARM MODE” option.

Step 2: Please click the “Right” button to switch it to “SOLID” status.

Step 3: Please click the "Down" button until the green bar jumps to “SAVE & EXIT”.

Step 4: Finally, please click "Iris +" to save your settings and exit the menu.

5. If you need to turn off the light, you can refer to the steps below. Please note that only some model support turn off the PIR light.

Step 1: Please click the “Right” button to switch the white light to “OFF” status.

Step 2: Please click the "Down" button until the green bar jumps to “SAVE & EXIT”.

Step 3: Please click "Iris +" to save your settings and exit the menu.