Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT41DB/DT61EQ/DW81KD/DW61LD/DT81DP/N48PI/N46PI/N44PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/I41HG/I41CS/S500/S300/FC200/NCK800/H800/H500/E500/E800
Purpose: When received the messages, you can read and edit messages.
Before you start:
- Set the device event.
- Enable the message push notification function, and the device alarm is triggered.
- Run the app and make sure you have log in to your account.
Steps:
1. On the Annke Vision main page, Tap the Notification to enter the Notification page to read messages.
You can choose the message you want to read.
Note: If the device has linked a camera, and the camera has captured pictures or recorded video when the alarm is triggered, you can view the picture and play the video.
2. Tap Edit at the upper-right corner of the page to edit messages.
- Select messages or tap Select All to select all messages.
- Tap Mark All as Read to mark the selected unread messages as read.
- Tap Delete to delete all the messages.
Note: The calling messages of the video intercom device cannot be displayed in the Messages page.
Comments
0 comments
Article is closed for comments.