Applies to: DT41Y / DT61Y / DT81Y / DN41R / DN61R / DN81R / DT41GB / DT81GB / DT61GB / DW41JD / DW81KD / DW61LD / DT81DP / N48PI / N44PI / N46PI / N44PAM / N48PAW / N46PCK / N88PCH / S200 / S300 / FCK800 / N88PCH / S200 / S300 / FCK H500
Purpose: This article introduces the commonly-used instructions that need to be completed on the monitor. If you are a new user of the ANNKE security system, it is highly recommended to have a look at this article.
Categories:
1. Recorder Activation.
2. Continuous Recording Schedule Setup.
3. Motion Recording Schedule Setup.
4. Footage Playback.
5. Footage Backup.
6. APP Motion Detection Alert Setup.
7. Email Motion Detection Alert Setup.
8. Network Setup.
9. Firmware Upgrade.
10. Footage Overwrite Setup.
11. Audio Setup.
12. Third-Party IP Camera Setup.
13. Admin Password Reset.
1. Recorder Activation
For earlier system interface:
Annke Vision - Setup Wizard on Annke DVR
For the new system interface(black):
Annke Vision-How to Finish the Setup Wizard? (H800)
For the new system interface (light blue): Coming soon!
Note: Only when the recorder is activated will the user be able to access the system menu on the monitor to further set up the recorder.
2. Continuous Recording Schedule Setup
For the earlier system interface:
Annke Vision - How to Set Up 24 Hours Recording?
For the new system interface (black):
Annke Vision-How to Set up 24-Hour Recording? (H800)
For the new system interface (light blue):
Annke Vision -- How to Setup the 24 Hours Recording? (S500 Series)
Note: When the continuous recording schedule is set up, the recorder will be able to record all the time.
3. Motion Recording Schedule Setup
For the earlier system interface:
Annke Vision - How to Set Up Motion Detection Recording?
For the new system interface (black):
Annke Vision-How to Set Up Motion Detection Recording? (H800)
For the new system interface (light blue):
Annke Vision - How to Setup Motion Detection Recording? (S500 Series)
Note: When the motion recording schedule is set up, the recorder will be able to record when there is a movement.
4. Footage Playback
For the earlier system interface:
Annke Vision - Brief Introduction of Playback Interface on Annke DVR/NVR
For the new system interface (black):
Annke Vision-How to Playback Recordings on The Monitor? (H800)
For the new system interface (light blue): Coming soon!
Note: The user will be able to check the history recordings via the playback function.
5. Footage Backup
For the earlier system interface:
Annke Vision - Backing Up the Video by Normal Search on ANNKE DVR/NVR
For the new system interface (black): Coming soon!
For the new system interface (light blue):
Annke Vision - How to Export The Footage to The USB Stick? (S500)
Note: If the videos can not be played on the PC, it is suggested to open the videos in the VLC player.
6. APP Motion Detection Alert Setup
For the earlier system interface:
Annke Vision - How to Set Up APP Push Notification for Motion Detection?
For the new system interface (black):
Annke Vision-How to Set up Push Notifications on The Phone APP? (H800)
For the new system interface (light blue):
Annke Vision - How to Setup Motion Detection Recording? (S500 Series)
Note: When the APP motion detection alert is set up, the user will get a push notification on the Annke Vision APP.
7. Email Motion Detection Alert Setup
For the earlier system interface:
Annke Vision - How to Set Up Email Notification?
For the new system interface (black):
Annke Vision - How to Set up Email Notifications?(H800 series)
For the new system interface (light blue):
Annke Vision - How to Set up Email Alert? (DW81KD New Series)
Note: When the email motion detection alert is set up, the user will get a notification through the email.
8. Network Setup
For the earlier system interface:
Annke Vision - What to Do If The Cloud P2P of The DVR/NVR System is Offline?
For the new system interface (black):
Annke Vision - What to Do If The NVR(H800) Is Offline?
For the new system interface (light blue):
Annke Vision - What to Do If P2P Status Shows Offline? (S500 series)
Note: Only when the network status of the recorder is online will the user be able to remotely view the cameras on the phone APP and PC through P2P.
9. Firmware Upgrade
For the earlier system interface:
Annke Vision - How to Upgrade the System's Firmware Version on a TV/monitor?
For the new system interface (black): Coming soon!
For the new system interface (light blue): Coming soon!
Note: Please contact the ANNKE technical support to see if there is a firmware update for your recorder before the firmware upgrade.
10. Footage Overwrite Setup
For the earlier system interface: Coming soon!
For the new system interface (black):
Annke Vision-How to Set up Overwrite Function? (H800)
For the new system interface (light blue): Coming soon!
Note: When the overwrite is set up, the record will delete the old footage automatically and gradually.
11. Audio Setup
For the earlier system interface:
Annke Vision - How to Make The DVR Record Audio?
For the new system interface (black):
Annke Vision-How to Make The System Record Audio? (H800)
For the new system interface (light blue):
Annke Vision - How to Make The Cameras Record Audio? (S500 series)
Note: If you can not get the recorder to record audio, please contact the ANNKE support at support@annke.com by email for further assistance.
12. Third-Party IP Camera Setup
For the earlier system interface:
Annke Vision - Adding Online IP Cameras on Annke DVR
For the new system interface (black):
Annke Vision-How to Connect Third-Party Camera to ANNKE NVR by ONVIF? (H800)
For the new system interface (light blue):
ANNKE VISION-How to Connect A Third-Party IP Camera To The DVR by ONVIF? (S500)
Note: Not all third-party IP cameras can work with the ANNKE DVRs|NVRs. Please make sure your third-party IP camera is ONVIF-supported and resolution-compatible.
13. Admin Password Reset
For the earlier system with the serial number like above:
ANNKE VISION - How to Reset The System Admin Password by Serial Number on the Monitor?
For the earlier|new system without the serial number:
ANNKE VISION - Reset Admin Password on Annke System via SADP Software
Note: The second method works with all the ANNKE DVRs|NVRs.
If this article is helpful to you, please click on 'Helpful' at the end of this article.
If you have any suggestions or questions for this article, please contact ANNKE support here.
Comments
0 comments
Please sign in to leave a comment.